Steel and Metal Fabrication Software for Job Shops and Fabricators
Estimate from drawings, track every assembly through cutting, welding and painting, link heat numbers to mill certificates and plan site deliveries from one system.
- Estimates from BOMs and drawings
- Assembly-level job tracking
- Heat numbers linked to mill certs
- Free consultation and written quote
Rated 5.0 on Clutch & 4.8 on GoodFirms by verified clients in the USA, UK, Australia, Europe & India
Get a free estimate
Takes 60 secTell us what slows your team down. A senior developer replies within 24 hours with ideas and a ballpark cost.
Looking for a job? This form is for client projects. Apply on our Careers page with your resume.
Got it, thank you!
Your request is with our team. A senior developer will reply within 24 hours with questions or a first estimate.
Continue on WhatsAppFabrication work does not fit generic software
A fabrication shop juggles one-off jobs, revised drawings, steel prices that move weekly and customers who want to know if the next truckload will reach site on Thursday. Office staff piece it together from spreadsheets, CAD exports and calls to the shop foreman. We build steel and metal fabrication software that follows each piece mark from the estimate to the cutting table, the welding bay, the paint shop and the delivery truck.
Most fabricators come to us with one urgent problem. Estimates take too long because someone types every member from the drawing. Material traceability falls apart when an inspector asks for the mill certificate behind a particular beam. Or nobody in the office knows which assemblies are welded, painted and ready to ship this week. We solve that first problem properly, then add the rest in phases.
You get a free consultation, a written fixed quote and an NDA. Work is paid in milestones, demoed weekly and built by developers you can talk to directly. You own the source code outright. If your shop already uses estimating or nesting software, we connect to it, fill the gaps around it or add AI features instead of asking you to change tools you like.
Problems fabricators tell us about
If any of these happen every week, software can take them off your plate.
Slow, manual estimating
Estimators count members and plates from PDFs, type weights into spreadsheets and add labor by experience. Big tenders take days, and mistakes show up only after the job is won.
Drawing revisions reach the shop late
An architect revises a connection, the office gets the new drawing, but the shop is already cutting from the old one. Rework eats both time and steel.
Heat numbers lost after cutting
Once a plate or beam is cut, the heat number is easily lost. When a client or inspector asks for traceability, staff search through cut lists and mill certificates.
No clear view of what can ship
Site wants a specific sequence of assemblies, but the office cannot tell which are welded, painted and inspected. Trucks leave half full or wait in the yard.
Features fabricators use every day
Start with the features that matter most for launch, then add the rest in later releases.
BOM import and quick takeoff
Member lists from modeling software or spreadsheets are imported with sizes, lengths and weights, so estimators price the job instead of retyping it.
Drawing revision control
Each drawing carries its revision. When a new one arrives, affected piece marks are flagged on the shop screens, and work on the old version is stopped.
Nesting software integration
Cut lists are sent to your nesting and CNC software, and the resulting remnants are recorded back into stock with sizes and heat numbers.
Heat number traceability
Heat numbers are captured at material receipt and carried through to each cut part, so mill certificates can be produced for any assembly in seconds.
Labor hours by operation
Clock-on and clock-off by job and operation shows actual fitting, welding and painting hours against the estimate while the job is still running.
Welder qualification tracking
Welder qualifications and expiry dates are stored, and the system warns supervisors before an unqualified welder is assigned to a critical joint.
Remnant and offcut inventory
Usable offcuts are tagged and searchable by grade and size, so they get used on small parts instead of being scrapped at the end of the month.
Shipping by erection sequence
Assemblies are grouped by the erection sequence site needs, and load planning shows weight and length so trucks are filled correctly and legally.
- React
- Next.js
- Node.js
- Laravel
- Python
- PostgreSQL
- Flutter
- TypeScript
- AWS
- OpenAI API
- Tekla Structures and SDS2 exports
- AutoCAD and DXF files
- Nesting and CNC cutting software
- Tally / QuickBooks / Xero
- Procore and site management tools
- Barcode and tag printers
- Microsoft 365
- WhatsApp Business API
Running your fabrication shop on spreadsheets?
Share a recent job, its drawings and how you tracked it. We will suggest a first module in a free consultation and send a fixed quote.
- 100% free
- No obligation
- Reply within 24 hours
What we build for fabrication shops
Estimating and job costing system
Import BOMs from Tekla, SDS2 or Excel, apply your material prices, labor rates and coating costs, and turn won bids into jobs with budgets attached.
Shop floor tracking app
Workers scan piece mark tags at cutting, fitting, welding and painting, so every assembly shows its current stage and the hours spent on it.
QC and documentation module
Inspection reports, weld records, NDT results and mill certificates are linked to each assembly and compiled into a handover dossier per job.
Delivery and site portal
Load lists, delivery notes and truck schedules for each shipment, with a portal where site managers see what is ready and confirm receipt.
Where AI and automation help fabricators
Practical AI that works on your own data, with a human approving anything important.
Drawing and tender document extraction
AI reads tender PDFs and shop drawings to pull out member schedules, specifications and coating requirements, giving estimators a first takeoff to check rather than a blank sheet.
Mill certificate reading
Scanned mill certificates are read with OCR, heat numbers and grades are matched to incoming material, and mismatches are flagged before steel enters stock.
Estimate versus actual insights
Completed jobs are compared with their estimates, and the system highlights which job types, connections or coatings are consistently underpriced.
Site update assistant
Project managers ask a chatbot which assemblies for a given level are ready, and it answers from live shop data instead of a phone call to the foreman.
Results fabricators look for
More bids with the same team
Imported BOMs and AI takeoffs cut estimating time, so your estimators can respond to more tenders without working every weekend.
Less rework from old drawings
Revision control on the shop floor means fewer parts cut or welded from superseded drawings, saving steel, labor and delivery dates.
Traceability that satisfies inspectors
Heat numbers, weld records and inspections are linked to every assembly, making quality dossiers quick to compile and easy to defend.
Smoother site deliveries
Knowing exactly what is ready lets you load trucks in erection order, keeping site crews working and clients happier.
Start small, see results, then grow.
Tell us your idea
Fill the 60-second form, WhatsApp us or call. A rough idea is enough.
Free consultation
A 30-minute call with a senior developer to understand goals, users and must-haves.
Fixed quote and plan
Written scope, milestones, timeline and a fixed price. No surprises later.
Build with weekly demos
You see working software every week and pay only as milestones are approved.
Launch and support
Deployment, monitoring and ongoing improvements after go-live.
Already use software that does not fit?
Keep what works. We fix and speed up existing systems, connect them to the tools your team uses, add AI where it saves time, or migrate you step by step without stopping the business.
What clients say about working with Ravindra and the team.
Verified reviews from Clutch, GoodFirms, LinkedIn and long-term clients in the USA, UK, Australia, Europe and India.
Steel and Metal Fabrication Software: FAQs
Ask us on WhatsApp. A real person replies, usually within minutes during working hours.
Ask on WhatsAppWhat does steel and metal fabrication software cost?
It depends on which parts you need, such as estimating, shop tracking, QC documentation or delivery planning, and which tools we integrate with. After a free consultation we give you a written fixed quote. Most shops start with one module, often estimating or shop tracking, and pay in milestones as each part goes live.
How long does it take to build?
A first module like shop floor tracking with piece mark scanning can usually be piloted within a few months. A full system covering estimating, tracking, QC and dispatch is delivered in phases. You see progress every week and can adjust priorities as your foremen and estimators test each release.
Can you work with our current estimating, nesting or accounting software?
Yes. We often connect to tools fabricators already rely on, like Tekla exports, nesting software and accounting packages. We can also fix or extend an existing in-house system, migrate your job history into a new one, or add AI features such as mill certificate reading on top of what you have.
Can the software support welding and structural steel standards?
We build with your applicable standards in mind, such as AWS D1.1, EN 1090 or AISC quality requirements, by storing welder qualifications, weld procedure references, inspection records and material traceability per assembly. Certification of your shop remains with your auditors, and we follow your quality manual when designing each workflow.
Will it work in a dusty, noisy shop?
Yes. Shop screens are designed for rugged tablets, wall-mounted terminals or handheld scanners, with large buttons and barcode or QR tag scanning instead of typing. If Wi-Fi is weak in parts of the yard, the app stores scans offline and syncs once the device reconnects.
Can we use it for both structural and sheet metal jobs?
Yes. Structural work is tracked by piece marks and assemblies, while sheet metal and job shop work is often tracked by part numbers and batches. We configure routings, costing and labels for each type, so one system covers both without forcing either team into the other's way of working.
