Pharmaceutical Manufacturing Software Built Around Your SOPs
Electronic batch records, QC workflows, deviation and CAPA tracking, and lot-level stock in one system your production, QA and stores teams actually use on the shop floor.
- Electronic batch records and line clearance
- QC, deviation and CAPA workflows
- Audit trails on every change
- 100% source code ownership
Rated 5.0 on Clutch & 4.8 on GoodFirms by verified clients in the USA, UK, Australia, Europe & India
Get a free estimate
Takes 60 secTell us what slows your team down. A senior developer replies within 24 hours with ideas and a ballpark cost.
Looking for a job? This form is for client projects. Apply on our Careers page with your resume.
Got it, thank you!
Your request is with our team. A senior developer will reply within 24 hours with questions or a first estimate.
Continue on WhatsAppSoftware for plants where every step needs a signature
A pharma plant runs on paper longer than most people outside the industry would believe. Batch manufacturing records travel from the dispensing booth to granulation, compression and packing, collecting signatures and handwritten weights along the way. We build pharmaceutical manufacturing software that replaces those binders with guided electronic records, so operators enter values once, supervisors verify on a tablet, and QA reviews a complete batch without hunting through pages for a missing initial.
Our work usually starts with one painful workflow rather than a full system. That might be the batch record for your highest-volume product, the deviation log that lives in a spreadsheet, or the QC sample tracker that the lab manages on a whiteboard. Once that module is live and trusted, we connect it to your ERP, your weighing balances and your warehouse, and the next module goes faster because the foundation is already there.
You get a written fixed quote after a free consultation, an NDA before we see your SOPs, and weekly demos where your QA head can test each screen. Payments are tied to milestones, and the full source code belongs to you. If you already run a QMS or ERP that half works, we can fix it, extend it or add AI on top instead of starting over.
What pharma plant heads tell us slows them down
If any of these happen every week, software can take them off your plate.
Batch records that take days to review
QA reviewers flip through hundreds of pages looking for missed signatures, overwritten figures and out-of-range readings. Release waits on paperwork long after the product itself has passed every test.
Deviations tracked in spreadsheets
Deviations, change controls and CAPAs sit in separate Excel files owned by different people. Nobody can say quickly which investigations are overdue or which batches are affected by an open issue.
Lot traceability depends on memory
When a supplier flags a raw material lot, stores staff dig through GRN files and issue slips to find every batch that used it. A recall query can eat a whole day.
Audit preparation becomes a fire drill
Before a regulator or customer audit, teams spend weeks collecting logbooks, calibration records and training files from different departments, then worry about gaps they could not find in time.
Features designed for regulated production
Start with the features that matter most for launch, then add the rest in later releases.
Guided electronic batch records
Each step shows the instruction, expected range and required checks. Out-of-limit entries are flagged at once and cannot be skipped without a reason and supervisor sign-off.
Audit trail on every field
Who changed what, when and why is stored for every value. Records are locked after approval, and corrections create a new version instead of overwriting the old one.
Electronic signatures by role
Operators, checkers and QA approvers sign with their own login and a reason code. Role rules stop the same person from executing and verifying a critical step.
Line clearance and equipment logs
Digital checklists for line clearance, cleaning and equipment usage replace paper logbooks. Equipment that is due for cleaning or calibration is blocked from new batches.
Deviation, change control and CAPA
Raise a deviation from the batch screen, link affected lots, assign investigation owners and due dates, and track CAPA effectiveness checks through to closure.
Forward and backward lot genealogy
Start from a raw material lot and see every finished batch that used it, or start from a finished batch and see every input, operator and machine involved.
QC sample and stability tracking
Log samples at receipt, assign tests, record results against specifications and schedule stability pulls so the lab never misses a time point.
Training matrix tied to SOPs
When an SOP is revised, affected staff are assigned the new version. The system checks training status before letting an operator sign a step.
- React
- Next.js
- Node.js
- Python
- PostgreSQL
- Flutter
- TypeScript
- Docker
- AWS
- OpenAI API
- SAP and Oracle ERP
- Tally / QuickBooks
- Weighing balances and scales
- Barcode and label printers
- LIMS platforms
- SCADA and PLC data via OPC UA
- Microsoft 365 and SharePoint
- Serialization and track-and-trace systems
Ready to retire the paper batch record?
Share one workflow that slows your plant down. We will review it in a free consultation and send a written fixed quote for the first module.
- 100% free
- No obligation
- Reply within 24 hours
What we build for pharma manufacturers
Shop-floor tablet app
Operators follow the electronic batch record step by step, capture balance readings directly, scan material labels and sign with their own credentials. Supervisors verify critical steps on the same screen.
QA and QC web portal
Reviewers see batch exceptions first, approve or reject with comments, manage deviations and CAPAs, and track lab samples from receipt to result without chasing analysts by phone.
Stores and dispensing module
GRN entry, quarantine and release status, FEFO picking, dispensing against batch orders and label printing, all tied to lot numbers so every gram can be traced back.
Management dashboard
Plant heads see batches in progress, pending releases, open deviations by age and equipment due for calibration, with drill-down to the record behind each number.
Where AI and automation help QA and production
Practical AI that works on your own data, with a human approving anything important.
Batch review by exception
Automated checks scan each completed record for missing entries, late signatures and borderline readings, so reviewers start with a short list instead of reading every page.
SOP search assistant
A RAG assistant answers operator questions from your approved SOPs and specifications, quoting the document and section, so people stop guessing or calling QA for every doubt.
Certificate of analysis extraction
Supplier COAs arriving as PDFs are read with OCR, values are matched against your specifications and mismatches are routed to QC before material is released.
Deviation trend spotting
Text from past deviations is grouped by root cause, product and equipment, helping QA see recurring issues early instead of investigating the same problem every quarter.
What changes once records go digital
Faster batch release
QA reviews exceptions instead of whole binders, so finished goods leave quarantine sooner and working capital stops sitting in the warehouse.
Fewer recording errors
Direct balance capture, range checks and mandatory fields stop the illegible numbers and missing initials that used to trigger deviations.
Calmer audits
Records, audit trails, training status and calibration history are a search away, so audit days become a walkthrough instead of a scramble.
Clear view of the plant
Managers see what is running, what is stuck and why, without calling three departments or waiting for the weekly review meeting.
Start small, see results, then grow.
Tell us your idea
Fill the 60-second form, WhatsApp us or call. A rough idea is enough.
Free consultation
A 30-minute call with a senior developer to understand goals, users and must-haves.
Fixed quote and plan
Written scope, milestones, timeline and a fixed price. No surprises later.
Build with weekly demos
You see working software every week and pay only as milestones are approved.
Launch and support
Deployment, monitoring and ongoing improvements after go-live.
Already use software that does not fit?
Keep what works. We fix and speed up existing systems, connect them to the tools your team uses, add AI where it saves time, or migrate you step by step without stopping the business.
What clients say about working with Ravindra and the team.
Verified reviews from Clutch, GoodFirms, LinkedIn and long-term clients in the USA, UK, Australia, Europe and India.
Pharmaceutical Manufacturing Software Development: FAQs
Ask us on WhatsApp. A real person replies, usually within minutes during working hours.
Ask on WhatsAppWhat does pharmaceutical manufacturing software cost?
Cost depends on how many modules you need, the number of products and sites, and which systems we connect. After a free consultation we review your SOPs and workflows and send a written fixed quote. Many plants start with one module, such as electronic batch records for a single product line, and pay in milestones as each part goes live.
How long does it take to go live?
A focused first module, like a deviation and CAPA tracker or a dispensing system, can usually reach validation testing within a few months. Full electronic batch records take longer because each master record has to be built and checked with your QA team. We agree on a timeline in the quote and show progress in weekly demos.
Can you work with our existing ERP or QMS?
Yes. Most plants already have an ERP for inventory and finance, and some have a QMS that covers part of the work. We integrate with those systems, migrate data out of older tools when needed, fix and extend software someone else built, or add AI features like COA extraction on top of what you already run.
How do you handle 21 CFR Part 11, EU GMP Annex 11 and data integrity?
We build with 21 CFR Part 11, Annex 11 and ALCOA+ data integrity principles in mind: audit trails, unique user logins, electronic signatures with reasons, record locking and controlled access. We also support your validation effort with requirement specs and test scripts. Formal validation and compliance sign-off remain with your QA team, and we follow your procedures throughout.
Can the system read data directly from balances and machines?
Yes. Most modern balances, checkweighers and PLC-based machines expose data over serial, network or OPC UA connections. We capture readings straight into the batch record, which removes manual transcription. For older equipment without an interface, we design a verified manual entry step with a second-person check instead.
Will it work for both formulation and API plants?
Yes. Formulation plants usually need batch records, dispensing and packing controls, while API plants care more about reaction stages, solvent tracking and yield calculations. The core of audit trails, signatures, deviations and lot genealogy is shared, and the batch templates are configured for your process type.
